MS1310-4813 Sub-G wireless module

Sub-G Module Descriptions:

The MS1310 series modules are ultra-low power and based on the high performance Texas InstrumentsTM CC1310 that is part of the SimpleLinkTM MCU platform. The platform consists of Wi-Fi® , Bluetooth® low energy, Sub-1 GHz, Ethernet, Zigbee® , Thread, and host MCUs. These devices all share a common, easy-to-use development environment with a single core software development kit (SDK) and a rich tool set.

The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48-MHz Arm Cortex® -M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex® -M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex® -M3) can maximize sleep time. The MS1310 series module support OTA (Over the Air Update) function.

 

Variants

MSxxxx-ABCC

MSxxxx=Main Chip

A= Main Chip package size 

B= Supported Frequency Band

CC= Antenna form factor
xxxx=1310;  TI CC1310 Chip
a=4; 4x4mm Chip Size
b=8; 800/900Mhz
cc=13; uFLconnector
xxxx=1312; TI CC1312 Chip
T.B.D
T.B.D
T.B.D

For further information about chip specification, please refer to the following links. 

CC1310: https://www.ti.com/lit/gpn/cc1310

Pin Configuration

Pin 

Symbol

Type

Description

1

GND

Power

Ground

2

3

4

  X32K_Q1

Analog I/O

32KHz crystal/oscillator pin1

5

  X32K_Q2

Analog I/O

32KHz crystal/oscillator pin2

6

DIO9

Digital/Analog I/O

GPIO, Sensor Controller, analog

7

DIO8

Digital/Analog I/O

GPIO, Sensor Controller, analog

8

VDDS

Power 

Main power supply

9

GND

Power

Ground

10

11

DIO7

Digital/Analog I/O

GPIO, Sensor Controller, analog

12

DIO6

Digital/Analog I/O

GPIO, Sensor Controller, analog

13

DIO5

Digital/Analog I/O

GPIO, Sensor Controller, analog

14

RESET_N

Digital Input

Reset, active low, No internal pullup. 

15

GND

Power

Ground

16

DIO4

Digital I/O

GPIO, high drive capability, JTAG_TDI

17

DIO2

Digital I/O

GPIO, Sensor Controller, high drive capability, TXD

18

JTAG_TCKC

Digital I/O

JTAG TCKC

19

JTAG_TMSC

Digital I/O

JTAG TMSC

20

DIO1

Digital I/O

GPIO, Sensor Controller, high drive capability, RXD

21

DIO3

Digital I/O

GPIO, high drive capability, JTAG_TDO

22

DIO0

Digital I/O

GPIO, Sensor Controller, high drive capability

23

GND

Power

Ground

24

Ant

RF

External RF antenna port

Outline Drawing

返回頂端
回到頂端